Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
TrackAtOnceFromTree exception 8, status 2 http://www.starburnsoftware.com/forum/starburn-sdk-f3/trackatoncefromtree-exception-status-t2093.html |
Page 1 of 1 |
Author: | daveturner [ Thu Jul 08, 2010 10:26 am ] |
Post subject: | TrackAtOnceFromTree exception 8, status 2 |
Hi, I am having a problem burning a Video DVD on a laptop: Dell Latitude D600 1.6GHz 256MB RAM DVD Drive DVD+-RW TS-L632D The problem can be replecated using your VideoBurner.exe demo program The results are as follows: The first part of the log looks fine but it ends with: 22:30:12 Burning started 22:30:34 StarBurn_CdvdBurnerGrabber_TrackAtOnceFromTree() failed, exception 8, status 2, text "CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed" Could you please tell me what is going wrong? What does 'Exception 8, Status 2' mean? Is there a list somewhere of these error codes and their meanings so that I dont have to bother you again if I encounter another one? Thank you for your time Best Regards Dave |
Author: | dima (staff) [ Thu Jul 08, 2010 2:49 pm ] |
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 |
Hello, Dave We should look into the StarBurn SDK log file, could you send this file to us please!! Regards, Dmitry |
Author: | daveturner [ Fri Jul 09, 2010 5:20 am ] |
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 |
HI the log file is: Burning video disc Destination device: DVD+-RW TS-L632D Source video file:: C:\Program Files\Cleartone\VMS\VIDEO_TS\ 22:30:12 160 MBs of cache will be used during burn process 22:30:12 Testing unit ready 22:30:12 Track-At-Once: Yes, Session-At-Once: No, Disc-At-Once PQ: No, Disc-At-Once raw P-W: No 22:30:12 Getting BUP (Buffer Underrun Protection) support 22:30:12 BUP (Buffer Underrun Protection) Enabled: Yes, Supported: Yes 22:30:12 Enabling BUP (Buffer Underrun Protection) 22:30:12 Setting CD/DVD speeds 22:30:12 Getting current CD/DVD speeds 22:30:12 Current read speed 11080 KBps (11080 maximum) 22:30:12 Current write speed 8310 KBps (8310 maximum) 22:30:12 Getting track information 22:30:12 Track Blank: Yes, NWA valid: Yes, free LBs 2298496, track ยน 1 22:30:12 Getting disc information 22:30:12 Disc erasable: No, Disc status: 0x 0, Last session status: 0x 0, Disc type: 5 22:30:12 Burning started 22:30:34 StarBurn_CdvdBurnerGrabber_TrackAtOnceFromTree() failed, exception 8, status 2, text "CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed" Thank you Dave |
Author: | anton (staff) [ Fri Jul 09, 2010 7:33 am ] |
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 |
This is not the log. This is console output. Enable logging with extended API call and catch StarBurn.log and send it to us. |
Author: | daveturner [ Fri Jul 09, 2010 9:40 am ] | ||
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 | ||
Here is the log file (if I attached it correctly) Thank you Dave
|
Author: | anton (staff) [ Fri Jul 09, 2010 9:44 am ] |
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 |
Unfortunately you did not Please try again or send it to support@rocketdivision.com alias. Thanks |
Author: | daveturner [ Mon Jul 12, 2010 9:27 am ] |
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 |
Have added the log successfully now, Many thanks Dave |
Author: | anton (staff) [ Mon Jul 12, 2010 9:47 am ] |
Post subject: | Re: TrackAtOnceFromTree exception 8, status 2 |
In your case you have power calibration area full... So we cannot pick up laser power and cannot burn successfuly. Please use other media. P.S. And switch to STPD instead of SPTI as burning method. Not critical in this particular case but should be in general |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |