#1 Burning Software

It is currently Thu Mar 28, 2024 11:28 pm

All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: TrackAtOnceFromTree exception 8, status 2
PostPosted: Thu Jul 08, 2010 10:26 am 
Offline

Joined: Fri Apr 16, 2010 6:09 am
Posts: 7
Hi,

I am having a problem burning a Video DVD on a laptop:

Dell Latitude D600
1.6GHz
256MB RAM

DVD Drive DVD+-RW TS-L632D

The problem can be replecated using your VideoBurner.exe demo program

The results are as follows:

The first part of the log looks fine but it ends with:

22:30:12 Burning started
22:30:34 StarBurn_CdvdBurnerGrabber_TrackAtOnceFromTree() failed, exception 8, status 2, text "CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed"


Could you please tell me what is going wrong?

What does 'Exception 8, Status 2' mean?

Is there a list somewhere of these error codes and their meanings so that I dont have to bother you again if I encounter another one?

Thank you for your time

Best Regards

Dave


Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Thu Jul 08, 2010 2:49 pm 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello, Dave

We should look into the StarBurn SDK log file, could you send this file to us please!!

Regards,

Dmitry


Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Fri Jul 09, 2010 5:20 am 
Offline

Joined: Fri Apr 16, 2010 6:09 am
Posts: 7
HI the log file is:

Burning video disc
Destination device: DVD+-RW TS-L632D
Source video file:: C:\Program Files\Cleartone\VMS\VIDEO_TS\
22:30:12 160 MBs of cache will be used during burn process
22:30:12 Testing unit ready
22:30:12 Track-At-Once: Yes, Session-At-Once: No, Disc-At-Once PQ: No, Disc-At-Once raw P-W: No
22:30:12 Getting BUP (Buffer Underrun Protection) support
22:30:12 BUP (Buffer Underrun Protection) Enabled: Yes, Supported: Yes
22:30:12 Enabling BUP (Buffer Underrun Protection)
22:30:12 Setting CD/DVD speeds
22:30:12 Getting current CD/DVD speeds
22:30:12 Current read speed 11080 KBps (11080 maximum)
22:30:12 Current write speed 8310 KBps (8310 maximum)
22:30:12 Getting track information
22:30:12 Track Blank: Yes, NWA valid: Yes, free LBs 2298496, track ยน 1
22:30:12 Getting disc information
22:30:12 Disc erasable: No, Disc status: 0x 0, Last session status: 0x 0, Disc type: 5
22:30:12 Burning started
22:30:34 StarBurn_CdvdBurnerGrabber_TrackAtOnceFromTree() failed, exception 8, status 2, text "CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed"


Thank you
Dave


Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Fri Jul 09, 2010 7:33 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
This is not the log. This is console output. Enable logging with extended API call and catch StarBurn.log and send it to us.


Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Fri Jul 09, 2010 9:40 am 
Offline

Joined: Fri Apr 16, 2010 6:09 am
Posts: 7
Here is the log file (if I attached it correctly)

Thank you
Dave


Attachments:
File comment: TrackAtOnceFromTree exception 8, status 2
Starburn.zip [6.08 KiB]
Downloaded 1053 times


Last edited by daveturner on Fri Jul 09, 2010 9:47 am, edited 1 time in total.
Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Fri Jul 09, 2010 9:44 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Unfortunately you did not :) Please try again or send it to support@rocketdivision.com alias. Thanks :)


Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Mon Jul 12, 2010 9:27 am 
Offline

Joined: Fri Apr 16, 2010 6:09 am
Posts: 7
Have added the log successfully now,

Many thanks
Dave


Top
 Profile  
 
 Post subject: Re: TrackAtOnceFromTree exception 8, status 2
PostPosted: Mon Jul 12, 2010 9:47 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
In your case you have power calibration area full... So we cannot pick up laser power and cannot burn successfuly. Please use other media.

P.S. And switch to STPD instead of SPTI as burning method. Not critical in this particular case but should be in general :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group