Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
Stop at 17% for 2 hours http://www.starburnsoftware.com/forum/starburn-f2/stop-for-hours-t1883.html |
Page 1 of 1 |
Author: | shoguide [ Sat May 30, 2009 5:00 am ] |
Post subject: | Stop at 17% for 2 hours |
How long should a typical Video or image capture take? Should I patiently wait 1-4 hours? The DVDs I tried stop at various places. The screen feedback indicates everything checks out ok: ... 21:13:26 : Try to check is DVD CSS protected... 21:13:26 : DVD is protected with CSS. 21:13:26 : Try to DVD Authorizing... 21:13:27 : DVD Authorized successfully. 21:13:27 : Grabbing... Log file attached (tried. The extension .log is not allowed, The extension .txt is not allowed, no extension is not allowed) It freezes at 17%. Is there a work-around? Thanks, Dan CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size updated to 4194304 UCHARs CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size is 1 MBs, 4194304 UCHARs +++ StarBurn:StarBurn_CdvdBurnerGrabber_CreateExEx(): EXITing with success, burner/grabber at 0x02BE1640, device name is 'CdRom0' CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): ENTERed CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): [ CD ] Current Read 5540, Maximum Read 5540, Current Write 4234, Maximum Write 4234 CStarBurn_CdvdBurnerGrabber::GetCurrentSpeedsForDVD(): UPDATED, Descriptor: 0, Current read speed in KBps: 5540, StartPerformance: 2284, EndPerformance: 5540 CStarBurn_CdvdBurnerGrabber::GetCurrentSpeedsForDVD(): IGNORED, Descriptor: 1, Current read speed in KBps: 5540, StartPerformance: 5540, EndPerformance: 2284 CStarBurn_ScsiTransportSxxx::ExecuteCDB(): Command failed SCSI Status: 0x02, CDB Length: 12, CDB Dump: 0xAC 0x14 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x32 0x00 0x00 0x00 0x00 0x00 0x00 SCSI sense data dump: Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0) Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00 Additional Sense Length: 0x0A (10) Command Specific Information: 0xAC 0x14 0x00 0x0A Additional Sense Code (ASC): 0x24, Additional Sense Code Qualifier (ASCQ): 0x00 |
Author: | anton (staff) [ Sun May 31, 2009 6:06 pm ] |
Post subject: | Re: Stop at 17% for 2 hours |
Looks like the disc has either RipGuard or ARccOS bad block based protection system together with CSS... You need other software to break it, not StarBurn. |
Author: | shoguide [ Mon Jun 01, 2009 6:18 pm ] |
Post subject: | Re: Stop at 17% for 2 hours |
Thanks. Makes sense. Feature request: After a designated number of read failures or time-outs and lack of the percentage indicator advancing, it would be helpful to prompt the user for a Continue or Cancel button. Consider, "StarBurn is either unable to determine the protection system used on this resource or experience other read errors. Click Cancel to discontinue." I assumed processing must still be occuring after 4 hours of waiting, because the drive was still churning and processes were active. |
Author: | anton (staff) [ Mon Jun 01, 2009 9:15 pm ] |
Post subject: | Re: Stop at 17% for 2 hours |
I think this is a good idea and we'll implement this in the nearest future. Thank you for suggestion! |
Author: | deepakp [ Wed Jun 03, 2009 4:14 pm ] |
Post subject: | Re: Stop at 17% for 2 hours |
Can we create ISO image of CSS protected Video DVD in StarBurn V12? Thank you. |
Author: | anton (staff) [ Thu Jun 04, 2009 5:45 am ] |
Post subject: | Re: Stop at 17% for 2 hours |
Yes. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |