#1 Burning Software

It is currently Wed Jun 19, 2019 5:35 pm

All times are UTC




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Stop at 17% for 2 hours
PostPosted: Sat May 30, 2009 5:00 am 
Offline

Joined: Sat May 30, 2009 4:21 am
Posts: 2
How long should a typical Video or image capture take? Should I patiently wait 1-4 hours? The DVDs I tried stop at various places. The screen feedback indicates everything checks out ok:
...

21:13:26 : Try to check is DVD CSS protected...
21:13:26 : DVD is protected with CSS.
21:13:26 : Try to DVD Authorizing...
21:13:27 : DVD Authorized successfully.
21:13:27 : Grabbing...

Log file attached (tried. The extension .log is not allowed, The extension .txt is not allowed, no extension is not allowed)
It freezes at 17%. Is there a work-around?
Thanks,
Dan



CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size updated to 4194304 UCHARs

CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size is 1 MBs, 4194304 UCHARs

+++ StarBurn:StarBurn_CdvdBurnerGrabber_CreateExEx(): EXITing with success, burner/grabber at 0x02BE1640, device name is 'CdRom0'

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): ENTERed

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): [ CD ] Current Read 5540, Maximum Read 5540, Current Write 4234, Maximum Write 4234

CStarBurn_CdvdBurnerGrabber::GetCurrentSpeedsForDVD(): UPDATED, Descriptor: 0, Current read speed in KBps: 5540, StartPerformance: 2284, EndPerformance: 5540

CStarBurn_CdvdBurnerGrabber::GetCurrentSpeedsForDVD(): IGNORED, Descriptor: 1, Current read speed in KBps: 5540, StartPerformance: 5540, EndPerformance: 2284

CStarBurn_ScsiTransportSxxx::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 12, CDB Dump: 0xAC 0x14 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x32 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0A (10)
Command Specific Information: 0xAC 0x14 0x00 0x0A
Additional Sense Code (ASC): 0x24, Additional Sense Code Qualifier (ASCQ): 0x00


Top
 Profile  
 
 Post subject: Re: Stop at 17% for 2 hours
PostPosted: Sun May 31, 2009 6:06 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Looks like the disc has either RipGuard or ARccOS bad block based protection system together with CSS... You need other software to break it, not StarBurn.


Top
 Profile  
 
 Post subject: Re: Stop at 17% for 2 hours
PostPosted: Mon Jun 01, 2009 6:18 pm 
Offline

Joined: Sat May 30, 2009 4:21 am
Posts: 2
Thanks. Makes sense.
Feature request: After a designated number of read failures or time-outs and lack of the percentage indicator advancing, it would be helpful to prompt the user for a Continue or Cancel button. Consider, "StarBurn is either unable to determine the protection system used on this resource or experience other read errors. Click Cancel to discontinue."

I assumed processing must still be occuring after 4 hours of waiting, because the drive was still churning and processes were active.


Top
 Profile  
 
 Post subject: Re: Stop at 17% for 2 hours
PostPosted: Mon Jun 01, 2009 9:15 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
I think this is a good idea and we'll implement this in the nearest future. Thank you for suggestion!


Top
 Profile  
 
 Post subject: Re: Stop at 17% for 2 hours
PostPosted: Wed Jun 03, 2009 4:14 pm 
Offline

Joined: Mon Aug 25, 2008 1:50 pm
Posts: 394
Can we create ISO image of CSS protected Video DVD in StarBurn V12?

Thank you.


Top
 Profile  
 
 Post subject: Re: Stop at 17% for 2 hours
PostPosted: Thu Jun 04, 2009 5:45 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Yes.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group