Burning CD/DVD and Blu-Ray/HD-DVD disc from ISO image file

starburnsoftware.com

To burn an existing ISO image onto CD/DVD and Blu-Ray/HD-DVD disc:

1. Click the Burn Image icon.

2. If you haven't yet inserted a disc into the drive, please do that, and click Refresh.

3. In the Image Burner Wizard, select a burner from the list (select the one you have inserted a disc in).

4. Click Next to continue.

5. Specify the image file you need to burn.

6. Press the Next button to continue.

7. Specify the burning mode by choosing an appropriate option in the Burning mode list.

8. Select a burning mode and if needed enable Test mode and/or the Verify written data option.

Note: Test mode performs all steps of burning with a low-power laser without actually writing data. Therefore, it allows for error checking and prevents damage of a media.

The Verify written data option ensures that data has been written properly. It launches verification process right after disc burning.

9. Click Next to continue.

10. If needed, select the Send optimum power calibration (OPC) checkbox to provide higher quality burning.

11. In the Burning speed field, choose one of the supported options.

12. Click Next to continue.

13. In the Options Summary screen, review the summary of the selected and specified options. Click Back to make changes if required.

14. Click Next to start burning.

15. Press the Cancel button to cancel burning or just wait for the process completion.

16. When burning is completed, you can save the log if needed.

Note: Click Save Log to save the current operation log. If there are any burning problems, use the Send Report options to send a failed operation log to the support team.

17. Click Finish to close the wizard.