Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
stuck when fastforward http://www.starburnsoftware.com/forum/starburn-sdk-f3/stuck-when-fastforward-t2509.html |
Page 1 of 1 |
Author: | leakeymore [ Fri Oct 31, 2014 8:43 am ] |
Post subject: | stuck when fastforward |
Hello. Its me again. . After I burn BD-RE disc using your software and play it in my player, when I fastforward the video I just burned it will freeze. I have 3 blu ray plyers and its the same thing in each player. I also have another software and when I burn the same file in that program its fine. Is this common with your software? I checked the videos (videos before I burned them)and they play fine. My blu ray players are my computer, PS3 and a sony. I never had this problem with my other software. Is this unique to your software and do you have a fix for it? Thank you for your time. And the product will fail if I burn large ISO file about 40G. Regards, |
Author: | andrey(staff) [ Mon Nov 03, 2014 3:34 pm ] |
Post subject: | Re: stuck when fastforward |
Do you burn some ISO file? Can you provide link to this file? |
Author: | leakeymore [ Tue Nov 04, 2014 4:18 am ] |
Post subject: | Re: stuck when fastforward |
Hi, the bluray iso file is too large to upload, it is about 50G, could you check the log file we sent carefully, and test by yourself and find a solution. If you need anything except the large iso file, feel free to let me know. Regards, |
Author: | andrey(staff) [ Tue Nov 04, 2014 4:11 pm ] |
Post subject: | Re: stuck when fastforward |
Did you send log file to our support email? What is the subject of the letter? |
Author: | leakeymore [ Wed Nov 05, 2014 2:54 am ] | ||
Post subject: | Re: stuck when fastforward | ||
Sorry, I attached the log file this time. Regards,
|
Author: | alexander (staff) [ Wed Nov 05, 2014 10:17 am ] |
Post subject: | Re: stuck when fastforward |
Do you call StarBurn_CdvdBurnerGrabber_BluRayFormat before writing? It may be caused when disc was formatted with inapplicable profile. Please perform full disc erasing and try again without calling StarBurn_CdvdBurnerGrabber_BluRayFormat |
Author: | leakeymore [ Wed Dec 03, 2014 1:59 am ] |
Post subject: | Re: stuck when fastforward |
sorry, I don't think so. Every time, I call StarBurn_CdvdBurnerGrabber_BluRayFormat() and then I call StarBurn_CdvdBurnerGrabber_Blank() to erase it. StarBurn_CdvdBurnerGrabber_BluRayFormat() must be needed? Full disc erasing must be used for first using BD-RE disc ? |
Author: | alexander (staff) [ Wed Dec 03, 2014 9:00 am ] |
Post subject: | Re: stuck when fastforward |
1. StarBurn_CdvdBurnerGrabber_BluRayFormat() must be needed? No. Please don't call StarBurn_CdvdBurnerGrabber_BluRayFormat, StarBurn SDK automatically format BD-RE during first use and before each FULL earsing. 2. Full disc erasing must be used for first using BD-RE disc ? No. StarBurn SDK prepared all necessary operations automatically. Regards, Alex |
Author: | alexander (staff) [ Wed Dec 03, 2014 9:28 am ] |
Post subject: | Re: stuck when fastforward |
Also in http://www.starburnsoftware.com/forum/starburn-sdk-f3/erase-type-blank-disc-fast-t2508.html you wrote Quote: If I use full erasing mode, all is fine, but if I don't use it for new BD-RE, some disc is fine and some is not fine, especially for bigger than 25G bluray iso. Today i perform a lot of test with new big BD-RE and try to reproduce this bug on my configuration. |
Author: | leakeymore [ Fri Dec 05, 2014 8:16 am ] |
Post subject: | Re: stuck when fastforward |
Quote: Hello. Its me again. . After I burn BD-RE disc using your software and play it in my player, when I fastforward the video I just burned it will freeze. I have 3 blu ray plyers and its the same thing in each player. I also have another software and when I burn the same file in that program its fine. Is this common with your software? I checked the videos (videos before I burned them)and they play fine. My blu ray players are my computer, PS3 and a sony. I never had this problem with my other software. Is this unique to your software and do you have a fix for it? Thank you for your time. can you give me a complete burn demo with checking drive, checking disc, erasing and burning ? I don't know what issue is in our software, my burn codes come from the V15.3 starburn SDK demo, C language libcmt version, such as TrackAtOnceFromFile project, Blank project. |
Author: | leakeymore [ Fri Dec 05, 2014 8:17 am ] |
Post subject: | Re: stuck when fastforward |
Quote: Hello. Its me again. . After I burn BD-RE disc using your software and play it in my player, when I fastforward the video I just burned it will freeze. I have 3 blu ray plyers and its the same thing in each player. I also have another software and when I burn the same file in that program its fine. Is this common with your software? I checked the videos (videos before I burned them)and they play fine. My blu ray players are my computer, PS3 and a sony. I never had this problem with my other software. Is this unique to your software and do you have a fix for it? Thank you for your time. can you give me a complete burn demo with checking drive, checking disc, erasing and burning by C or C++ language? I don't know what issue is in our software, my burn codes come from the V15.3 starburn SDK demo, C language libcmt version, such as TrackAtOnceFromFile project, Blank project. |
Author: | alexander (staff) [ Mon Dec 08, 2014 10:08 am ] |
Post subject: | Re: stuck when fastforward |
Please see our C++ (GUI) DataBurner sample |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |