Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
Disc burned incorrectly and verifying takes a long time http://www.starburnsoftware.com/forum/starburn-sdk-f3/disc-burned-incorrectly-and-verifying-takes-long-time-t2489.html |
Page 1 of 2 |
Author: | flöle [ Sun Jan 19, 2014 10:46 am ] |
Post subject: | Disc burned incorrectly and verifying takes a long time |
Hi, a user posted the following StarBurn.log: https://docs.google.com/file/d/0BwCtjTboRALsMjgzT2hMcFlhS0U/edit He experiences a case where the disc is visibly (see https://forum.cdburnerxp.se/topic/9543-hl-dt-st-dvdram-gh22ns90/?p=36565) burned incorrectly and verifying is very slow. Could you please check if this is StarBurn's fault (other burning applications work fine according to the user) or rather a hardware error? Thanks and best regards, Florian |
Author: | andrey(staff) [ Tue Jan 21, 2014 12:18 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
The burning looks normal in the log file. Maybe there are some problems with current couple of drive + disc vendor. So I can propose next: 1)User have to update drive firmware and try burn disc form another vendor. And if this don't work then: 2)We can buy the same drive, the same discs and burn the same files set and reproduce this issue. |
Author: | flöle [ Wed Jan 22, 2014 8:09 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
Firmware has been upgraded from this website: http://www.lg.com/uk/support-product/lg-GH22NS90 |
Author: | andrey(staff) [ Fri Feb 28, 2014 3:43 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
Would you provide us by disc(media) vendor. |
Author: | flöle [ Sun Mar 09, 2014 9:50 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
Quote: I usually use Verbatim AZO DVD-R 16x, but I also tried some Sony and TDK, but I do not remember exactly the models. I tried some rewritable and dual layer (but only Verbatim) too, but always with same results: errors.
All brand and disks type works fine with my the other drive LG HL-DT-ST DVDRAM GSA-H44N. |
Author: | andrey(staff) [ Thu Apr 03, 2014 3:35 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
We will try to reproduce this issue with models GH22NS50 and GH24NS90 in a few days. Unfortunately we haven't found GH22NS90 on our market. |
Author: | andrey(staff) [ Fri Apr 25, 2014 1:49 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
We had tried to reproduce this issue but unfortunately both drives burned (dual layer Verbatim) successfully. |
Author: | flöle [ Fri Apr 25, 2014 5:38 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
Did you also try StarBurnX or only core? |
Author: | andrey(staff) [ Mon Apr 28, 2014 8:46 am ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
We have tried only from core, but StarBurnX uses the same functions. |
Author: | flöle [ Wed Apr 30, 2014 9:48 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
Here is another log file, same issue: https://drive.google.com/file/d/0ByTLqslqbE9_LWYyZllTS09OaGs/edit?usp=sharing Does this help? |
Author: | andrey(staff) [ Mon May 05, 2014 9:30 am ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
File isn't available for download. |
Author: | flöle [ Sat May 24, 2014 1:10 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
Alex told me he could successfully download the log file, so could you please look into it? Thanks! |
Author: | alexander (staff) [ Thu Jun 05, 2014 4:50 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
In your log i see that verification performs on speed 1385 kBps, but StarBurn_CdvdBurnerGrabber_SetReadSpeed was previously called with CDVD_SPEED_IS_KBPS_MAXIMUM parameter. In my assumption - StarBurn_CdvdBurnerGrabber_SetReadSpeed & StarBurn_CdvdBurnerGrabber_SetSpeeds functions maybe works incorrect with some drives when CDVD_SPEED_IS_KBPS_MAXIMUM passed as parameter for DVD or BD medias. Need some time for tests and fix. |
Author: | alexander (staff) [ Wed Sep 24, 2014 12:39 pm ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
fixed |
Author: | aslam [ Wed Oct 22, 2014 10:52 am ] |
Post subject: | Re: Disc burned incorrectly and verifying takes a long time |
a user posted the following StarBurn.log: https://docs.google.com/file/d/0BwCtjTboRALsMjgzT2hMcFlhS0U/edit |
Page 1 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |