Rocket Division Software
http://www.starburnsoftware.com/forum/

Internal SDK error: Command failed (with 13.3)
http://www.starburnsoftware.com/forum/starburn-sdk-f3/internal-sdk-error-command-failed-with-t2317.html
Page 1 of 2

Author:  flöle [ Wed Oct 03, 2012 6:44 am ]
Post subject:  Internal SDK error: Command failed (with 13.3)

Hi,

a user reported an "Internal SDK error" when burning an audio disc with StarBurnX 13.3. I attached the log file for details. Could you tell me what the issue is here?

Best regards,
Florian

Attachments:
StarBurn.zip [8.84 KiB]
Downloaded 2314 times

Author:  dima (staff) [ Thu Oct 04, 2012 10:04 am ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Hello,

The "illegal mode for this track" error happened!

The possible causses of this problem:
1) The CD Writer has problems writing on the CD-R/RW media. The CD-R itself is not clean or is of bad quality ( please resort to another brand mark of CD-R/RW );

2) The power supply of your computer is not providing enough power. If You are using an external device please check the power supply ( numerous graphics cards require a lot of power, the same goes for numerous CPUs and some harddisks);

3) The mains cable or the plug is defective. Please use another plug cable for test purposes;

4) The computer vibrates to such an extent that the laser can not stay in the track;

5) The device has become hot! Only operate in cool conditions;

6) The lens of the write laser is dirty;

There is the firmware update utility for the Hitachi device: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCEG3BFXW&upd_id=7427&os_group_id=6

Best Regards,

Dmitry

Author:  flöle [ Thu Oct 04, 2012 2:13 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Thanks, will let you know if I found out the cause.

Author:  dima (staff) [ Thu Oct 04, 2012 2:17 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Thanx!

Dmitry

Author:  flöle [ Tue Oct 16, 2012 3:44 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Here is another one, is this the same?

Attachments:
StarBurn-InternalSDK.zip [25.27 KiB]
Downloaded 2399 times

Author:  dima (staff) [ Fri Oct 26, 2012 1:04 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Hello,

Checking this issue ...

Thanx

Dmitry

Author:  flöle [ Mon Nov 05, 2012 5:46 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Any hints yet?

Author:  dima (staff) [ Wed Nov 07, 2012 11:29 am ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Hello,

No, seems these issues are different! Current issue - "Unknown CRC-ECC error" ... probably some sort of copy protection [ grabing track #20 was failed] ... or disc is die :)

Regards,

Dmitry

Author:  flöle [ Wed Nov 07, 2012 4:49 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

OK, thanks.

At this point please let me once again remind you of your, if you will pardon the expression, crappy error messages. If everything is an "internal SDK error", how should my application ever display some proper messages to the user? I'd save me and you a lot of time if I could display a meaningful text when an error happens. Sending over a log file and getting it checked by you is not very efficient.

Could you please consider providing more specific error codes and error texts for your exceptions? I need better error codes to provide translated specific error messages and I also need a description of all errors that can happen, their possible cause / meaning and resolution.

Author:  dima (staff) [ Thu Nov 08, 2012 7:20 am ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Hello,

Yes, You are right! We will improve it!!

Regards,

Dmitry

Author:  flöle [ Mon Nov 12, 2012 3:09 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

OK. Sorry, but I got another one. Happens during audio burning, every time according to the user. Any hints?

Attachments:
StarBurn-9096.zip [13.04 KiB]
Downloaded 2301 times

Author:  dima (staff) [ Tue Nov 13, 2012 4:45 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Hello,

1) We are checking this issue ...

2) The new build is here: link was removed

Best regards,

Dmitry

Author:  flöle [ Sun Mar 31, 2013 9:39 am ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Another one...when I try to burn the same audio files as the user does, it works fine for me. Please provide some hints for this issue.

Attachments:
StarBurn-9296.zip [7.36 KiB]
Downloaded 2270 times

Author:  dima (staff) [ Wed Apr 17, 2013 5:02 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

Hello,

Could you send/upload the original "Villanova Junction Blues-1.wav" file?!

Regards

Dmitry

Author:  flöle [ Fri Apr 19, 2013 6:47 pm ]
Post subject:  Re: Internal SDK error: Command failed (with 13.3)

I sent you the file per e-mail.

Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/