Rocket Division Software
http://www.starburnsoftware.com/forum/

UdfDataBurner.Size is imprecise
http://www.starburnsoftware.com/forum/starburn-sdk-f3/udfdataburner-size-imprecise-t2282.html
Page 1 of 1

Author:  flöle [ Sat Jul 28, 2012 12:22 pm ]
Post subject:  UdfDataBurner.Size is imprecise

Hi,

when comparing the required disc size (UdfDataBurner.Size) to the actual free disc space (drive.DiscInfo.TotalSize- drive.DiscInfo.UsedSize), it may happen that enough free disc space is reported, yet when burning, an "insufficient disc space" exception (STARBURN_ERR_DISC_NO_FREE_SPACE) is thrown by the Burn() method.

In my particular case:
UdfDataBurner.Size * 1024 = 736289792 bytes
(TotalSize - UsedSize) * 2048 (= Mode1_LB_Size) = 736960512 bytes

So either one of the sizes is incorrect, or the exception is incorrectly thrown. Please fix.

Author:  anton (staff) [ Sat Jul 28, 2012 3:08 pm ]
Post subject:  Re: UdfDataBurner.Size is imprecise

Does it happen immediately or @ the end? Lead-in & lead-out also occupy space.

Author:  flöle [ Sat Jul 28, 2012 4:07 pm ]
Post subject:  Re: UdfDataBurner.Size is imprecise

Immediately.

Author:  andrey(staff) [ Mon Jul 30, 2012 2:23 pm ]
Post subject:  Re: UdfDataBurner.Size is imprecise

We will check this week.

Author:  andrey(staff) [ Tue Aug 07, 2012 3:23 pm ]
Post subject:  Re: UdfDataBurner.Size is imprecise

Will be fixed in the nearest week.

Author:  flöle [ Sat Feb 23, 2013 6:47 pm ]
Post subject:  Re: UdfDataBurner.Size is imprecise

Currently, there is a huge "buffer" of approx. 10MB calculated in the databurner objects. This has lead to numerous user complaints, since you can not use the full (or nearly full) disc space anymore. Other burning applications do not reserve 10MB fo burning. COuld you possibly look into that and reduce the reserved space if possible?

Author:  andrey(staff) [ Mon Feb 25, 2013 10:32 am ]
Post subject:  Re: UdfDataBurner.Size is imprecise

Hello,

We can investigate this and implement calculation more accurate.
But we can't do it in the nearest release update.
We will try to do it next nearest release update.

Author:  riham [ Sat Nov 15, 2014 11:37 am ]
Post subject:  Re: UdfDataBurner.Size is imprecise

I further tested the situation. It is not related to the type of drive, but caused by something related to the motherboard (SATA controller, driver, etc.). Currently I use Intel DQ77MK. The problem doesn't appear on other motherboards I could test. Further I installed an LSI SAS controller into the Intel motherboard and plugged one LG drive to the SAS the other to the SATA on the motherboard. Tray status is reported correctly through the SAS controller, but gives wrong result through the SATA. I attach the logs. Test were run twice. First both drives' tray open, second closed and media present.

Author:  andrey(staff) [ Mon Nov 17, 2014 4:45 pm ]
Post subject:  Re: UdfDataBurner.Size is imprecise

Possible you chose a wrong thread, because the tray status doesn't connected with the disc space.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/