#1 Burning Software

It is currently Thu Mar 28, 2024 4:54 pm

All times are UTC




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: StarBurnX: UDfDataBurner far too slow
PostPosted: Wed Jun 20, 2012 5:15 pm 
Offline

Joined: Sun Jun 14, 2009 6:00 pm
Posts: 542
Hi,

as you know I am currently in the process of switching from Numedia Soft to your SDK. After finishing the implemenation based on StarBurnX, I disconvered that the UDfDataBurner is FAR too slow for usage (adding files to the image).

For comparison (using 7635 files, 795 folders, total 1.6GB):
Crappy old NMS SDK: 16 seconds
StarBurnX v13.1: 30 minutes+ (and it's not even halfway through, I just grew impatient like any of my users will do).

Can you please do something about that? I won't mind if StarBurn is a few seconds slower, but this is certainly not acceptable.

Particulary slow methods are:
CreateFolder
AddFileEx
GetFileObject

Best regards,
Florian


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Wed Jun 20, 2012 6:08 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Do you have traces enabled and something catching logged messages? Or do you profiling against release build?


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Wed Jun 20, 2012 6:23 pm 
Offline

Joined: Sun Jun 14, 2009 6:00 pm
Posts: 542
If done the comparison using a release build with no logging enabled.


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Wed Jun 20, 2012 6:24 pm 
Offline

Joined: Sun Jun 14, 2009 6:00 pm
Posts: 542
Comment from one of my beta testers:

Quote:
...adds stuff to compilation layout incredibly slowly - I was adding two folders of about 90 GB size and progress bar is hanging on each file for several tens of seconds - after about 6 hours, when it was still adding, I stopped whole process, tried to restart computer and make compilation again, but it was exactly the same. I then tried completely different external disk with 27 GB folder (to make sure that the problem wasn't caused by some error on first disk), but that was the same slowness as well (I stopped adding after about 3 hours when it still wasn't done). I gave up and uninstalled that 4.5 completely and installed back old version 4.3.8.2560 [NMS SDK] and it works now fine as usual - adding that 27 GB folder took like 2 minutes and it is now burned without problem


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Thu Jun 21, 2012 6:40 am 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

Yes, it's really strange ... we are checking!!

Thanx!!

Dmitry


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Thu Jun 28, 2012 3:19 pm 
Offline

Joined: Sun Jun 14, 2009 6:00 pm
Posts: 542
Any news yet?


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Mon Jul 02, 2012 8:39 am 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

Yes, we did some improvements regarding to this issue,


The new build will be ready after two days!

Regards,

Dmitry


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Mon Jul 02, 2012 4:36 pm 
Offline

Joined: Sun Jun 14, 2009 6:00 pm
Posts: 542
Great, I'll check the performance again.


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Mon Jul 09, 2012 2:59 pm 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

New build of StarBurnX has been uploaded on our ftp:

link was removed

Regards,

Dmitry


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Mon Jul 09, 2012 4:11 pm 
Offline

Joined: Sun Jun 14, 2009 6:00 pm
Posts: 542
Nice, now you're as fast as NMS. Being "just as fast" is probably not a good selling point, but good enough for me :)
Thanks!


Top
 Profile  
 
 Post subject: Re: StarBurnX: UDfDataBurner far too slow
PostPosted: Tue Jul 17, 2012 6:29 am 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Thanx!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group