Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR http://www.starburnsoftware.com/forum/starburn-sdk-f3/exception-hresult-0x80040255-starburn-err-systemerror-t2223.html |
Page 1 of 2 |
Author: | hseguchi [ Tue Dec 13, 2011 4:48 am ] |
Post subject: | Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
We use the DataBurner for an UDFDataBurner for UDF file systems. PC : HP Z800 Windows7 Professional 64bit SP1 The problem occurred when we write data to BD-R disc. 1) There are two BD-R discs. (a)one is blank disc, call it No1disc (b)another one is written by UDFS.sys, using Live File System on Windows7, call it No2disc 2) After we read from No2disc We write data to No1disc using UDFDataburner.Burn() function. Burn() fails with the error code HRESULT: 0x80040255 "STARBURN_ERR_SYSTEMERROR". Also when writing data in BD-RE from hard disc, the same Exception has occurred. Does this Exception occur in what kind of case? |
Author: | dima (staff) [ Tue Dec 13, 2011 11:58 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hello, At the first, we should look into the StarBurn log file! Please, tune the DebugFileName and DebugFacility properties before calling the Initialize(ex) function! Regards, Dmitry |
Author: | hseguchi [ Mon Dec 19, 2011 1:27 am ] | ||
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR | ||
Hi, When writing data in BD-RE from hard disc, the same Exception has occurred. I attached the StarBurn log file, Please confirm attached file. Best Regards, Hiroyuki Seguchi
|
Author: | dima (staff) [ Mon Dec 19, 2011 4:50 pm ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hello, Hiroyuki Seguchi It looks strange! This error means that something unexpected happened 1) Could you try to check this issue with SPTD transport ( instead of using SPTI )! Call the StarBurnX.InitializeEx function and specify the SPTD transport!! Generally speaking using SPTD is more preferable than using SPTI; 2) Could you check the property values LastWin32ErrorCode and LastError; Regards, Dmitry |
Author: | hseguchi [ Wed Dec 21, 2011 8:03 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hi, I tried to initialize the following codes.( SPTD transport ) StarBurnX InitalizeEX(licenceKey, STARBURN_TRANSPORT.STARBURN_TRANSPORT_SPTD) Unfortunately I encountered the error code HRESULT: 0x800402A7 in my PC. What else should I add the codes ? What does this error code mean ? ====== Exception 0x800402A7 _starBurnX.LastWin32ErrorCode = 0 _starBurnX.LastErrorCode = STARBURN_ERR_TRANSPORT_NOT_SUPPORTED _starBurnX.LastError = "Unsupported transport:SPTD driver detection error." ====== Best Regards, Hiroyuki Seguchi |
Author: | dima (staff) [ Wed Dec 21, 2011 9:44 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hi, Could you try to install the latest version of SPTD driver: http://www.duplexsecure.com/en/downloads Regards, Dmitry |
Author: | hseguchi [ Wed Dec 21, 2011 1:43 pm ] | ||
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR | ||
Hi I'll confirm, after I upgrade SPTD driver. STARBURN_ERR_SYSTEMERROR Exception has occurred. I attached the StarBurn log file, Please confirm attached file. Regards, Hiroyuki Seguchi
|
Author: | hseguchi [ Thu Dec 22, 2011 4:40 am ] | ||
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR | ||
Hi STARBURN_ERR_SYSTEMERROR Exception has occurred again. I attached the StarBurn log file, Please confirm attached file. _dataBurner.LastWin32ErrorCode = 23 _dataBurner.LastErrorCode = STARBURN_ERR_SYSTEM_ERROR _dataBurner.LastError = WIN32 error:CStarBurn_UdfVolumeFile::RealRead(): StarBurn_UDF2_VolumeSeekRead( 0x0000000029230040, 0x000000002C1E0000, 65536, 3441408 ) failed, status 23 [ 0x17 ] Regards, Hiroyuki Seguchi
|
Author: | dima (staff) [ Thu Dec 22, 2011 10:59 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hello!! So we guess that reason of this problem is what the first BD device reads data slowly than second burns this data. As result the SDK reports the "BUFFER UNDERRUN"!! You may try to increase the buffer size for the burning device ( tune the CacheSize property for the "No1disc" Drive object ), but we cannot give you any guaranty that your burning configuration ( from BD to BD ) will work well! Regards, Dmitry |
Author: | hseguchi [ Fri Dec 23, 2011 5:11 am ] | ||
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR | ||
Hi I try to increase the buffer size for the burning device ( 64MB , 128MB ) STARBURN_ERR_SYSTEMERROR Exception has occurred again. I attached the StarBurn log file, Please confirm attached file. DataBurner.Drive.CacheSize = 64; I checked log file, but result is same to previous result. CStarBurn_CdvdBurnerGrabber::TrackAtOnce(): BUFFER UNDERRUN CStarBurn_UdfVolumeFile::RealRead(): StarBurn_UDF2_VolumeSeekRead( 0x0000000026FB0040, 0x00000000285E0000, 32, 3441408 ) failed, status 23 [ 0x17 ] CStarBurn_UdfVolumeFile::RealRead(): EXITing with failure, exception number 0x00000005, exception text 'CStarBurn_UdfVolumeFile::RealRead(): StarBurn_UDF2_VolumeSeekRead( 0x0000000026FB0040, 0x00000000285E0000, 65536, 3441408 ) failed, status 23 [ 0x17 ]' Regards, Hiroyuki Seguchi
|
Author: | dima (staff) [ Fri Dec 23, 2011 6:39 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hello, Seems the same problem occurred. Could you try to allocate the larger buffer - 800MB for example! And once again, you should allocate this buffer for the burning device! Regards, Dmitry |
Author: | hseguchi [ Fri Dec 23, 2011 8:01 am ] | ||
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR | ||
Hi I try to increase the buffer size for the burning device ( 800MB ) STARBURN_ERR_SYSTEMERROR Exception has occurred again. I attached the StarBurn log file, Please confirm attached file. _dataBurner.LastErrorCode = STARBURN_ERR_SYSTEM_ERROR _dataBurner.LastWin32ErrorCode = 23 _dataBurner.LastError = WIN32 error:CStarBurn_UdfVolumeFile::RealRead(): StarBurn_UDF2_VolumeSeekRead( 0x00000000274F0040, 0x000000002A460000, 65536, 3441408 ) failed, status 23 [ 0x17 ] Regards, Hiroyuki Seguchi
|
Author: | hseguchi [ Fri Dec 23, 2011 8:38 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hi _dataBurner.LastWin32ErrorCode = 23 This win32 error is ERROR_CRC. Can't she read in BD-R correctly and become a data error? Regards, Hiroyuki Seguchi |
Author: | dima (staff) [ Fri Dec 23, 2011 9:52 am ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hello, Hmm, seems you are right, could you test if the source media and its content are valid ? Regards, Dmitry |
Author: | hseguchi [ Fri Dec 23, 2011 3:19 pm ] |
Post subject: | Re: Exception HRESULT: 0x80040255 ... STARBURN_ERR_SYSTEMERROR |
Hi I have one question and plan. We finally restore original code with SPTI transport. We can't get LastWin32ErrorCode by original code. May I judge STARBURN_ERR_SYSTEMERROR to be failed to read or write? But I can't find why same Exception occurred when I copy from HDD to BD-R. This case is only writing to BD-R. If it failed to read from HDD, we can get something from EventLog. I try to get log file in another case. regards |
Page 1 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |