Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
StarBurnX.Drive.State not up-to-date http://www.starburnsoftware.com/forum/starburn-sdk-f3/starburnx-drive-state-not-date-t2170.html |
Page 1 of 1 |
Author: | flöle [ Fri Apr 29, 2011 1:48 pm ] |
Post subject: | StarBurnX.Drive.State not up-to-date |
Hi, if StarBurnX.Drive.State is not up to date, that is for example if the state says "removed" even though a disc is inserted, how can I refresh that property? Neither DiscInfo.Refresh() nor DriveInfo.Refresh() seems to work. I currently have a problem because I check the drive state before checking the DiscInfo. I noticed that sometimes DiscInfo.DiscType has a valid disc type (other than none) even though no disc is inserted and Drive.State says "removed". Now however, it appears that the opposite case also happens, so that Drive.State is "removed" but a disc is actually inserted. I need to find a way to determine the real state of these properties. Regards, Florian |
Author: | anton (staff) [ Fri Apr 29, 2011 7:25 pm ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Looks like Dima has non-initialized variable here. Let me ask him to check this out. Thanks! |
Author: | flöle [ Sat Apr 30, 2011 2:19 pm ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
I'd appreciate a quick fix in this case, since I got quite a few users suffering from this problem. Thanks. |
Author: | dima (staff) [ Mon May 02, 2011 3:24 pm ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Hello, Florian The Drive.State property detects state of the Drive dynamically! Did you test the "Drive.State" issue with the latest StarBurnX build? Regards, Dmitry |
Author: | flöle [ Mon May 02, 2011 3:31 pm ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Not yet. I will let my users try it. |
Author: | flöle [ Tue May 03, 2011 6:46 pm ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Seems indeed to be fixed with the latest version. |
Author: | dima (staff) [ Wed May 04, 2011 4:08 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Hello, Florian 1) Perfect! 2) Be informed that we have added the new device state - STARBURN_DRIVE_STATE_BUSY, this state will be available only for SPTD transport. Regards, Dmitry |
Author: | deepakp [ Wed May 04, 2011 4:22 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
From where should I get the updates? |
Author: | dima (staff) [ Wed May 04, 2011 5:56 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Hello, There is the latest StarBurnX Build: link was removed Regards, Dmitry |
Author: | deepakp [ Wed May 04, 2011 7:36 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Hello Dima Sir, You said, "Be informed that we have added the new device state - STARBURN_DRIVE_STATE_BUSY, this state will be available only for SPTD transport." But how to use SPTD transport mode? |
Author: | dima (staff) [ Wed May 04, 2011 8:27 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Hello, You should call the StarBurnX.InitializeEx function and specify SPTD transport in the second parameter. Regards, Dima |
Author: | deepakp [ Mon May 09, 2011 4:20 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
dima (staff) wrote: Hello, There is the latest StarBurnX Build: link was removed Regards, Dmitry Hello Dima Sir, This build has a fix for the problem of getting drive.State dynamically. Thank you very much for the build. This fix several other problems I and my user's had previously. Thank you. One more thing, I working on that SPTD part suggested above. I have some questions, 1) When should I install SPTD drivers before registering StarBurnX12.dll by admin rights or after? 2) How to do silent installation(installation which does not requires reboot) of SPTD drivers? Thank you, once again. |
Author: | dima (staff) [ Mon May 09, 2011 5:31 am ] |
Post subject: | Re: StarBurnX.Drive.State not up-to-date |
Hello, 1) It doesn't matter . 2) You should check it with guys from the "DuplexSecure" : http://www.duplexsecure.com/home Regards, Dmitry |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |