| Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
| Why only single speed is shown? http://www.starburnsoftware.com/forum/starburn-sdk-f3/why-only-single-speed-shown-t2154-30.html |
Page 3 of 3 |
| Author: | flöle [ Sun Aug 14, 2011 7:07 am ] |
| Post subject: | Re: Why only single speed is shown? |
Here's another one: My app has only one speed, Nero has multiple speeds available: http://forum.cdburnerxp.se/viewtopic.php?f=3&t=10927 Sure that there is not something wrong on your side? |
|
| Author: | dima (staff) [ Tue Aug 16, 2011 6:56 am ] |
| Post subject: | Re: Why only single speed is shown? |
Hello, We have checked the Roxio software! It displays the same values of supported speeds as the StarBurnX!! ( for the same disc )!! You will get the different values of supported speeds for the different disc vendors !!!! Regards, Dmitry!! |
|
| Author: | dima (staff) [ Tue Aug 16, 2011 7:09 am ] |
| Post subject: | Re: Why only single speed is shown? |
Hello Again!! The second device is the CD ONLY device ( as I can see on the customer screen shots)!! Your customer putted the DVD disc into the CD DRIVE!! What values of speed we should return??!! In case the inserted disc is not supported the StarBurnX will return the "Max" speed for current drive!! Regards, Dmitry!! |
|
| Author: | flöle [ Thu Aug 18, 2011 1:45 pm ] |
| Post subject: | Re: Why only single speed is shown? |
Hm, I don't think so. Please compare this http://www.abload.de/image.php?img=cdburnerxp-dvd-lauferkypf0.png and this http://www.abload.de/image.php?img=nero-dvd-schreibgeschwtmok.png |
|
| Author: | dima (staff) [ Mon Aug 22, 2011 4:00 am ] |
| Post subject: | Re: Why only single speed is shown? |
Hello, 1) Send the log file to us! 2) Check the latest firmware for this device: http://www.samsungodd.com/eng/firmware/FWdownload/FWDownload.asp?product_code=&language_code=&SearchMode=MODELSEARCH&SearchWord=sh-s223c&image1.x=40&image1.y=7 3) Try to test this issue with SPTD transport; Regards, Dmitry |
|
| Author: | flöle [ Thu Mar 08, 2012 6:15 pm ] | ||
| Post subject: | Re: Why only single speed is shown? | ||
Got a different log file now. Speeds shown: 16x 24x 32x 40x 48x Speeds expected: 4x 8x 16x 24x 32x 40x 48x The user says 16x causes errors sometimes, and he has successfully burned 8x and 4x speed discs, but doesn't get the option burning with such a low speed. Can the lower speeds be added?
|
|||
| Author: | anton (staff) [ Thu Mar 08, 2012 8:24 pm ] |
| Post subject: | Re: Why only single speed is shown? |
The drive does not allow to set speeds below 16x. Actually it DOES but reports back it will use 16x. What you can do - make "relaxed" mode allowing to select ALL speeds below upper told one. And actually try setting the one user points to (if he's sure). And burn at it and tell in the log REPORTED back speed. It may work if device has something broken (burns @ one speeds and says back other). But we cannot detect it programmatically - it's only burn time to compare vs. expected value. |
|
| Author: | flöle [ Thu Mar 08, 2012 8:33 pm ] |
| Post subject: | Re: Why only single speed is shown? |
So there is no code in StarBurn that checks if the speed I set is below the minimum supported speed and thus makes my actions useless? Well, I guess I need to offer more speeds than report in this case, but I get the impression that this CD burning business is more guesswork than anything else 
|
|
| Author: | anton (staff) [ Thu Mar 08, 2012 8:47 pm ] |
| Post subject: | Re: Why only single speed is shown? |
We allow you to set burning speed and query drive what he had accepted and report back to you. We don't check for you for not supplying some bogus value. I don't think so. It's definitely broken device. Flashing new firmware may fix it. flöle wrote: So there is no code in StarBurn that checks if the speed I set is below the minimum supported speed and thus makes my actions useless?
Well, I guess I need to offer more speeds than report in this case, but I get the impression that this CD burning business is more guesswork than anything else |
|
| Author: | flöle [ Thu Mar 08, 2012 8:54 pm ] |
| Post subject: | Re: Why only single speed is shown? |
anton (staff) wrote: We allow you to set burning speed and query drive what he had accepted and report back to you. How does the "reporting back" work? |
|
| Author: | anton (staff) [ Thu Mar 08, 2012 10:17 pm ] |
| Post subject: | Re: Why only single speed is shown? |
1) You set speed 2) You get current speed |
|
| Author: | flöle [ Fri Mar 09, 2012 4:42 pm ] |
| Post subject: | Re: Why only single speed is shown? |
How do I get "current speed"? Don't see such a property in StarBurnX. |
|
| Author: | anton (staff) [ Fri Mar 09, 2012 6:19 pm ] |
| Post subject: | Re: Why only single speed is shown? |
I'll ask Dima to contribute as you're not interested in core API calls. flöle wrote: How do I get "current speed"? Don't see such a property in StarBurnX.
|
|
| Author: | dima (staff) [ Tue Mar 13, 2012 6:57 am ] |
| Post subject: | Re: Why only single speed is shown? |
Hello, You should check the WriteSpeed/ReadSpeed property of DriveInfo object ( for the specific Drive)! Regards, Dmitry |
|
| Page 3 of 3 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
