#1 Burning Software

I tried examples of starburn core and they are working fine.
When I try to write my own class I always get error:
StarBurn_CdvdBurnerGrabber_TrackAtOnceFromTree() failed, exception 5, status 0, text "CStarBurn_CdvdBurnerGrabber::TrackAtOnce(): WaitForSingleObject() failed, status 0, returned 258"

The process has stoped at StarBurn_CdvdBurnerGrabber_TrackAtOnceFromTree() and waits approx 10 min. Next, I get the error.
What it waits? And what must I do before burning?

I use the original classes from examples
TsbBurner
TsbBurnAtOnceToCDDVDAction
and some others

I think, that I do the similar code, but it don't work
What have I missed?

BTW: I also tried StarburnX, but I couldn't get it to work correctly with DVD-RW disks. CD(all), DVD+(-)R, DVD+RW it processes correctly. But it hangs at DVD-RW disks.
However, examples with StarBurn core works correctly with any disks.
I've tried the trial of latest starbern SDK and get the same problem.

Wow! Whole bunch of problems... OK, let's try to handle them one-by-one.

1) For the failed wait it means burning thread failed to wait for expected amount of time for cache thread to pump data into burning cache.
It means something went deadly wrong (say you're trying to burn DVD image from 10 Mbps network or disk is full of bad blocks and access time just sucks or
whole machine is doing hardcore paging now and responds dog slow). So we'd like to hear more about your hardware/software configuration and see
*complete* StarBurn log.

2) StarBurnX should work in the same way as core StarBurn does. So if you've managed to see the difference please let us see the log so we'd find out what's wrong.

3) Handling different types of the media is implemented transparently. You should not notice any differences.

Thanks!

Anton

I know that I do something incorrectly but I can't understand what exactly.
Anyway I continue my investigation

Regarding StarBurnX:
I try to burn disk in original example, but after burning DVD-RW I get the closed session when I request multisession disk.
Disk information shows that the disk is writable, but I get the error when I try to write next session.
StarBurn-core examples are working correctly

In the post above I've asked about the logs. We still need them.

See log in attachment.
I start DataBurner (from VB StarBurnX examples), write some files to DVD-RW disk and close DataBurner
Next, I run it again and try to write next session.
I get the error that disk can't be written because it is closed

You're using outdated ~3 years old version of StarBurn SDK. Update to V12 so we could start looking at this issue.

I'll try. But I have the license only for StarBurn SDK v10.5

This means your support plan is over and you need to renew it.

Use evaluation version of V12. It has eval key embedded.