CBuilder sample Crashed when call StarBurn_UpStartEx

Quey · **Joined:** Tue Aug 12, 2008 8:37 am **Posts:** 36

The Debug.log file recorded:
CDevice::InitStarBurnDll():StarBurn_UpStartEx() failed, exception 293082054
It happened only in one computer with :
ASUS A8N-VM mainboard
AMD Athlon 64 Processor 3000+

It occurred in: AudioBurner.exe, DeviceInfo.exe, DiscEraser.exe, ImageBurner.exe, and ImageGrabber.exe

All MSVC sample worked fine.

I installed entirely new Windows XP w/ SP3, still the same.

Please advice mw how to solve it?

andrey(staff) · **Joined:** Fri Jan 26, 2007 4:31 pm **Posts:** 452

Quey wrote:

The Debug.log file recorded:
CDevice::InitStarBurnDll():StarBurn_UpStartEx() failed, exception 293082054
It happened only in one computer with :
ASUS A8N-VM mainboard
AMD Athlon 64 Processor 3000+

It occurred in: AudioBurner.exe, DeviceInfo.exe, DiscEraser.exe, ImageBurner.exe, and ImageGrabber.exe

All MSVC sample worked fine.

I installed entirely new Windows XP w/ SP3, still the same.

Please advice mw how to solve it?

Hello,

Please wait a few days, build will be updated, bugs in CBuilder samples will be fixed.

Quey · **Joined:** Tue Aug 12, 2008 8:37 am **Posts:** 36

Nice to hear that, thanks.

BTW, could you add a simple sample to get the SCSI port ID, SCSI bus ID, SCSI target ID, and SCSI LUN for a CD/DVD drive? :roll:

anton (staff) · **Posted:** Thu Aug 14, 2008 5:10 pm

1) Thank you for your patience!

2) ASPI is obsolete and not recommended to be used at all. So we'll better spend some time on other samples

Quey wrote:

Nice to hear that, thanks.

BTW, could you add a simple sample to get the SCSI port ID, SCSI bus ID, SCSI target ID, and SCSI LUN for a CD/DVD drive? :roll:

Quey · **Joined:** Tue Aug 12, 2008 8:37 am **Posts:** 36

Understood.

But many C samples need those values as command-line arguments, such as GrabDisc.c and SessionAtOnceRawRawPW.c. That can make it easier to modify these samples and integrated to application software :lol:

aaron (staff) · **Posted:** Fri Aug 15, 2008 1:25 pm

We're moving them from ASPI -> SPTI/SPTD one-by-one. That's the point...

Quey wrote:

Understood.

But many C samples need those values as command-line arguments, such as GrabDisc.c and SessionAtOnceRawRawPW.c. That can make it easier to modify these samples and integrated to application software :lol:

Quey · **Joined:** Tue Aug 12, 2008 8:37 am **Posts:** 36

Yes, we eventially use the SPTI mode too.

Np problem about that :wink:

aaron (staff) · **Posted:** Tue Aug 19, 2008 7:00 am

Good

Quey wrote:

Yes, we eventially use the SPTI mode too.

Np problem about that :wink:

#1 Burning Software

CBuilder sample Crashed when call StarBurn_UpStartEx

Who is online