Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
Failing to burn http://www.starburnsoftware.com/forum/starburn-f2/failing-burn-t2315.html |
Page 1 of 1 |
Author: | hub_cap [ Mon Sep 24, 2012 8:39 pm ] |
Post subject: | Failing to burn |
Failing to burn an .iso to a d/l burner. Starburn recognizes the drive and blank disc properly. log: 17:31:05 : Creating CD/DVD or Blu-Ray/HD-DVD from image 17:31:05 : Source File: : C:\temp_dvd\CRZ0NNW7\CRZ0NNW7.iso 17:31:05 : Destination device: HL-DT-ST DVD+-RW GSA-T21N 17:31:05 : Requested burning speed: Maximum 17:31:05 : Burn Method: Track-At-Once 17:31:05 : Started 17:31:06 : Testing unit ready... 17:31:06 : Unit is ready! 17:31:06 : Getting BUP (Buffer Underrun Protection) support... 17:31:06 : Getting BUP succeeded! 17:31:06 : Enabling BUP (Buffer Underrun Protection)... 17:31:06 : Enabling BUP succeeded! 17:31:06 : Try to set selected CD/DVD or Blu-Ray/HD-DVD speeds... 17:31:06 : Speeds successfully set 17:31:06 : Sending OPC (Optimum Power Calibration)... 17:31:22 : Burning : Burning failed! : SCSI Status: 0x00, CDB Length: 12, CDB Dump: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00 0x00 0x00 0x00 0x00 SCSI sense data dump: Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0) Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00 Additional Sense Length: 0x0A (10) Command Specific Information: 0xBF 0x35 0x37 0x3E Additional Sense Code (ASC): 0x26, Additional Sense Code Qualifier (ASCQ): 0x00 |
Author: | andrey(staff) [ Thu Sep 27, 2012 9:01 am ] |
Post subject: | Re: Failing to burn |
Hello, We already know about the problem. Will be fixed in the nearest time. Thank you for collaboration. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |