Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
Starburn 13 problem with multisession http://www.starburnsoftware.com/forum/starburn-f2/starburn-problem-with-multisession-t2192.html |
Page 1 of 2 |
Author: | gujal [ Fri Aug 26, 2011 10:56 pm ] | ||
Post subject: | Starburn 13 problem with multisession | ||
I have used Starburn 12 release 10 for a while and updated to Starburn 13 recently. Since then when I try to burn Data on to DVD+R, In the burning options screen, the option "Create multisession disc" is ticked and grayed out. I do not want multisession and there is no way to untick it. It used to work correctly in the earlier version. My OS is Win7 x64 SP1. I have attached a screen shot. Please advise how to get that option enabled so that I can tick/untick the multisession option. Thanks
|
Author: | andrey(staff) [ Mon Aug 29, 2011 12:59 pm ] |
Post subject: | Re: Starburn 13 problem with multisession |
Thank for report, will check it and fix ASAP. |
Author: | gujal [ Wed Oct 26, 2011 8:20 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
Any update on this issue? Please |
Author: | andrey(staff) [ Wed Oct 26, 2011 9:07 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
gujal wrote: Any update on this issue? Please Yes, fixed, please download and install current version of StarBurn from our site. |
Author: | gujal [ Thu Jan 12, 2012 7:41 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
andrey(staff) wrote: Yes, fixed, please download and install current version of StarBurn from our site. Where can I find this new version, Please? I have tried downloading every couple weeks for a while now and I always end up with the same version - StarBurn Version 13 (0x20110818) So my problem is still there. Please advise |
Author: | andrey(staff) [ Thu Jan 12, 2012 8:09 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
Hello, Please download and install StarBurn v13 from site: http://www.starburnsoftware.com/products/starburn/download/download-starburn-free Distributive was updated, version not changed, changed only build. |
Author: | Nifu [ Wed Feb 08, 2012 12:09 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
Hi, The link provided in the earlier post and on the website is still downloading the build with the locked multisession option. Please advise. |
Author: | andrey(staff) [ Wed Feb 08, 2012 8:17 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
Very strange. Try to uninstall and then install downloaded distributive P.S. Today I download and install StarBurn from the site. And multisession exist. |
Author: | Nifu [ Wed Feb 08, 2012 6:04 pm ] |
Post subject: | Re: Starburn 13 problem with multisession |
Hi andrey, Still no luck on my system (Win 7 64-bit SP1). I re-downloaded today. Uninstalled, reinstalled and still got build 0x20110818. I'll wait for the first upgrade to version 13 and try it again then. The previous version 12 was working fine so I have no pressing need to upgrade. Just was looking to try any new features. Thank you for the quick response. |
Author: | andrey(staff) [ Wed Feb 08, 2012 7:14 pm ] |
Post subject: | Re: Starburn 13 problem with multisession |
Hi, Build 0x20110818 is ok. Please check multisession feature in "Burn Data" wizard. |
Author: | gujal [ Thu Feb 09, 2012 7:56 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
Hi Andrey The problem exists for me too after uninstalling and reinstalling the latest download. |
Author: | andrey(staff) [ Thu Feb 09, 2012 8:35 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
I think I understood what was going on What media type do you use? |
Author: | Nifu [ Fri Feb 10, 2012 1:02 pm ] |
Post subject: | Re: Starburn 13 problem with multisession |
I'm using DVD+R. The media ID is RITEK-F16-01 as reported by VSO Inspector. |
Author: | gujal [ Fri Feb 10, 2012 9:30 pm ] | |||
Post subject: | Re: Starburn 13 problem with multisession | |||
I am using Verbatim DVD+R 16x Media on a Pioneer Drive. Full details in the attached screenshots. Also, when trying to burn DVD-Video, I always end up with a session close error with the following message Code: 11:17:05 : Creating DVD-Video
11:17:05 : Source Video file: 'C:\tmp\DVD-Video\VIDEO_TS' 11:17:05 : Destination device: PIONEER DVD-RW DVR-219L 11:17:05 : Started 11:17:05 : Testing unit ready... 11:17:05 : Unit is ready! 11:17:05 : Probing supported write modes... 11:17:05 : Track-At-Once is supported! 11:17:05 : Getting BUP (Buffer Underrun Protection) support... 11:17:05 : Getting BUP succeeded! 11:17:05 : Enabling BUP (Buffer Underrun Protection)... 11:17:05 : Enabling BUP succeeded! 11:17:05 : Setting speed 16.0x (22160 KBps)... 11:17:05 : Set speed 16.0x (22160 KBps) successfully! 11:17:05 : Sending OPC (Optimum Power Calibration)... 11:17:15 : Sending OPC succeeded. 11:17:22 : Cache is Full. 11:17:22 : Burning... 11:21:43 : Closing session... 11:21:43 : Closing Session Error! 11:21:43 : SCSI Status: 0x00, CDB Length: 10, CDB Dump: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 SCSI sense data dump: Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0) Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00 Additional Sense Length: 0x0A (10) Command Specific Information: 0x00 0x00 0x00 0x00 Additional Sense Code (ASC): 0x30, Additional Sense Code Qualifier (ASCQ): 0x06 11:21:43 : Eject
|
Author: | andrey(staff) [ Mon Feb 13, 2012 8:09 am ] |
Post subject: | Re: Starburn 13 problem with multisession |
Nifu wrote: I'm using DVD+R. The media ID is RITEK-F16-01 as reported by VSO Inspector. You are right, it's our bug. We always do multisession for DVD+RW, DVD-RAM and for DVD+R. For DVD+R it's mistaken. Will fix in the nearest few weeks and with few some other fixes will release new version of StarBurn. |
Page 1 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |