| Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
| Apparently freezes at 99% completion? http://www.starburnsoftware.com/forum/starburn-f2/apparently-freezes-completion-t2135.html |
Page 1 of 1 |
| Author: | velnarah [ Thu Dec 16, 2010 7:46 pm ] |
| Post subject: | Apparently freezes at 99% completion? |
Hey I am burning some video DVD's, originally copied from a DVD-R I recorded from the TV. After figuring out how to capture an ISO image and then how to burn it, I managed to be well on my way to burning some copies. I wanted to make a lot, maybe a 100 of them. I've made nearly 20 with about 3 duds. The past two or three have gone normal but it gets to 99% and stays there. Everything appears like normal, and the burner drive sounds like it is still burning but nothing is happening. I let over an hour go by the last time and it stayed like this till finally I tried to cancel and couldn't. Had to end the task via task manager. Tried to eject the disk. It would not eject. Had to restart the computer then it ejected the disk. This is ruining the disks because I don't think I can erase and reuse them. Below is a copy of the log. Something else I find strange, yesterday I could choose the burn speed. It has not been giving me that option today and I have no idea why. Version: StarBurn 12.1 Build 20091021 16:08:21 Creating CD/DVD or Blu-Ray/HD-DVD from image 16:08:21 Source File: C:\Users\Owner\Documents\StarBurn\Images\DVD_VIDEO_RECORDER.iso 16:08:21 Destination device: TSSTcorp CDDVDW TS-H653N 16:08:21 Requested burning speed: Maximum 16:08:21 Burn Method: Track-At-Once 16:08:21 Started 16:08:21 Testing unit ready... 16:08:21 Unit is ready! 16:08:21 Getting BUP (Buffer Underrun Protection) support... 16:08:21 Getting BUP succeeded! 16:08:21 Enabling BUP (Buffer Underrun Protection)... 16:08:21 Enabling BUP succeeded! 16:08:21 Try to set selected CD/DVD or Blu-Ray/HD-DVD speeds... 16:08:21 Speeds successfully set 16:08:21 Sending OPC (Optimum Power Calibration)... 16:08:32 Burning 16:12:31 Closing session... |
|
| Author: | andrey(staff) [ Thu Dec 30, 2010 10:51 am ] |
| Post subject: | Re: Apparently freezes at 99% completion? |
Hello, 1) Analyze the situation with hanging, I need the full log. Could you send me report from the main window (Help-> Send report). In letter body past link to this forum message. 2)Setting speed available in wizards only if Expert mode is ON. http://www.starburnsoftware.com/help/switchingbetweenadvanceandbasicwizardsfunctionality.htm |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|