Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
Can't burn grabbed image http://www.starburnsoftware.com/forum/starburn-f2/can-burn-grabbed-image-t1921.html |
Page 1 of 1 |
Author: | motheroffour [ Sun Jul 19, 2009 6:20 am ] |
Post subject: | Can't burn grabbed image |
I seem to having a great deal of trouble burning images. I'm trying to create a spare copy of a Playstation 2 game. It grabs the image (although this took some time) but when it comes to burning the image it spits out the disc. I have the log and I'm hoping you could assist. Thanks in advance. 15:52:49 : Creating CD/DVD or Blu-Ray/HD-DVD from image 15:52:49 : Source File: : C:\Documents and Settings\Me\My Documents\StarBurn\Images\1_01.iso 15:52:49 : Destination device: HL-DT-ST DVDRAM GSA-H44N 15:52:49 : Requested burning speed: Maximum 15:52:49 : Burn Method: Track-At-Once 15:52:49 : Started 15:52:49 : Testing unit ready... 15:52:49 : Unit is ready! 15:52:49 : Getting BUP (Buffer Underrun Protection) support... 15:52:49 : Getting BUP succeeded! 15:52:49 : Enabling BUP (Buffer Underrun Protection)... 15:52:49 : Enabling BUP succeeded! 15:52:49 : Try to set selected CD/DVD or Blu-Ray/HD-DVD speeds... 15:52:49 : Speeds successfully set 15:52:49 : Sending OPC (Optimum Power Calibration)... 15:53:02 : Burning : Burning failed! : SCSI Status: 0x00, CDB Length: 10, CDB Dump: 0x2A 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 SCSI sense data dump: Error Code: 0x71, Is Sense Valid: No, Segment Number: 0x00 (0) Sense Key: 0x03, Reserved: 0x00, Incorrect Length: No End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00 Additional Sense Length: 0x0A (10) Command Specific Information: 0x35 0x2D 0x03 0x0E Additional Sense Code (ASC): 0x0C, Additional Sense Code Qualifier (ASCQ): 0x00 |
Author: | andrey(staff) [ Mon Jul 20, 2009 2:45 pm ] |
Post subject: | Re: Can't burn grabbed image |
Please try another disc. If error will be reproduced please send to support@rocketdivision.com full log report, for this on burn progress page click "Send Report" button. |
Author: | motheroffour [ Fri Jul 24, 2009 11:13 am ] |
Post subject: | Re: Can't burn grabbed image |
Thanks for your reply. I tried another disc and it worked, but also found that the disc I originaly tried to use does work. I had trouble once again with another image but found if I closed Starburn then restarted it the discs would work. A bit puzzling but as I found a way around the issue I'm happy Just as a side note, when I tried to use the "Send Error Report" I got the message that it had encountered a problem and had to close the burn image wizard, and the usual send a report to Microsoft message. |
Author: | andrey(staff) [ Fri Jul 24, 2009 11:51 am ] |
Post subject: | Re: Can't burn grabbed image |
motheroffour wrote: Thanks for your reply. I tried another disc and it worked, but also found that the disc I originaly tried to use does work. I had trouble once again with another image but found if I closed Starburn then restarted it the discs would work. A bit puzzling but as I found a way around the issue I'm happy Just as a side note, when I tried to use the "Send Error Report" I got the message that it had encountered a problem and had to close the burn image wizard, and the usual send a report to Microsoft message. What version of StarBurn you use? |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |