Rocket Division Software http://www.starburnsoftware.com/forum/ |
|
starburn: Files can't be added http://www.starburnsoftware.com/forum/starburn-f2/starburn-files-can-added-t1592.html |
Page 1 of 1 |
Author: | chimpgrrl [ Mon Sep 15, 2008 12:19 am ] |
Post subject: | starburn: Files can't be added |
I'm burning a data cd through the wizard and lots of my files return the following error. I can't figure out why.. File with name "XYXZ" Can't be added! can you enlighten me? thanks. |
Author: | andrey(staff) [ Mon Sep 15, 2008 12:23 pm ] |
Post subject: | Re: starburn: Files can't be added |
chimpgrrl wrote: I'm burning a data cd through the wizard and lots of my files return the following error. I can't figure out why..
File with name "XYXZ" Can't be added! can you enlighten me? thanks. Please write full file name(file name with full path) which produce this error. |
Author: | chimpgrrl [ Mon Sep 15, 2008 12:55 pm ] |
Post subject: | can't add files - error message |
The error screenshot is shown below. I've checked permissions on the files, and tried setting it up with both formats (joliet or the other). http://abacusdesign.net/~skc/abacus/starburn.gif |
Author: | andrey(staff) [ Tue Sep 16, 2008 8:09 am ] |
Post subject: | Re: can't add files - error message |
chimpgrrl wrote: The error screenshot is shown below. I've checked permissions on the files, and tried setting it up with both formats (joliet or the other).
http://abacusdesign.net/~skc/abacus/starburn.gif Please do next steps: 1)Delete all files in StarBurn log folder: Path example: "C:\Program Files\Rocket Division Software\StarBurn\Wizards\Logs" 2)Reproduce your error. 3)Send to me all new files form StarBurn log folder: "C:\Program Files\Rocket Division Software\StarBurn\Wizards\Logs" Thank you for your cooperation. |
Author: | chimpgrrl [ Tue Sep 16, 2008 11:43 am ] |
Post subject: | Log files |
*********GUI LOG **************** == Truncated log removed by Anton == |
Author: | aaron (staff) [ Tue Sep 16, 2008 9:48 pm ] |
Post subject: | |
Very nice. But please zip the file and send it to support@rocketdivision.com as forum software truncates it after 64KB. Thank you very much for understanding! viewtopic.php?t=740 |
Author: | m110s [ Tue Nov 11, 2008 5:48 pm ] |
Post subject: | |
aaron (staff) wrote: Very nice. But please zip the file and send it to support@rocketdivision.com as forum software truncates it after 64KB. Thank you very much for understanding!
viewtopic.php?t=740 Any news? I also found this bug. Do you want my log? I really like Starburn and I hope you'll fix that bug. |
Author: | anton (staff) [ Tue Nov 11, 2008 7:34 pm ] |
Post subject: | |
No, we did not get anything from user. Yes, please follow with the log. Thanks! m110s wrote: aaron (staff) wrote: Very nice. But please zip the file and send it to support@rocketdivision.com as forum software truncates it after 64KB. Thank you very much for understanding! viewtopic.php?t=740 Any news? I also found this bug. Do you want my log? I really like Starburn and I hope you'll fix that bug. |
Author: | m110s [ Tue Nov 11, 2008 11:43 pm ] |
Post subject: | |
anton (staff) wrote: No, we did not get anything from user. Yes, please follow with the log. Thanks!
OK. I sent log. Do you need more information? |
Author: | anton (staff) [ Wed Nov 12, 2008 8:58 am ] |
Post subject: | |
No, thanks, got everything required so far! m110s wrote: anton (staff) wrote: No, we did not get anything from user. Yes, please follow with the log. Thanks! OK. I sent log. Do you need more information? |
Author: | anton (staff) [ Wed Nov 12, 2008 6:15 pm ] |
Post subject: | |
Andrew had replied to your e-mail. In a nutshell: one of the files you've tried to burn <4GB so you need to use UDF file system rather then ISO9660. |
Author: | m110s [ Thu Nov 13, 2008 10:08 am ] |
Post subject: | |
anton (staff) wrote: Andrew had replied to your e-mail. In a nutshell: one of the files you've tried to burn <4GB so you need to use UDF file system rather then ISO9660.
Thanks for fast answer. I found your solution is a little bit complicated. It needs to create UDF image and than burn. I think that it will be nice if you implement through Data Burner Wizard to choose ISO9660+UDF for file system. P.S. Sorry for my bad English |
Author: | anton (staff) [ Thu Nov 13, 2008 9:25 pm ] |
Post subject: | |
We're already busy with this kind of stuff and you'll see new updated Data Burner and Image Builder in V11. Probably this December. Thanks! m110s wrote: anton (staff) wrote: Andrew had replied to your e-mail. In a nutshell: one of the files you've tried to burn <4GB so you need to use UDF file system rather then ISO9660. Thanks for fast answer. I found your solution is a little bit complicated. It needs to create UDF image and than burn. I think that it will be nice if you implement through Data Burner Wizard to choose ISO9660+UDF for file system. P.S. Sorry for my bad English |
Author: | m110s [ Thu Nov 13, 2008 11:03 pm ] |
Post subject: | |
anton (staff) wrote: We're already busy with this kind of stuff and you'll see new updated Data Burner and Image Builder in V11. Probably this December. Thanks!
Good news! I can't hardly wait! |
Author: | anton (staff) [ Fri Nov 14, 2008 7:43 am ] |
Post subject: | |
We too m110s wrote: anton (staff) wrote: We're already busy with this kind of stuff and you'll see new updated Data Burner and Image Builder in V11. Probably this December. Thanks! Good news! I can't hardly wait! |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |