#1 Burning Software

It is currently Sun May 26, 2019 5:11 pm

All times are UTC




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Fri Oct 31, 2014 7:08 am 
Offline

Joined: Tue Jun 24, 2014 10:37 am
Posts: 26
I have some problems by using starburn SDK. firstly, burn bd iso to BD-RE failed, I think the reason may be I forgot formatting disc, so I add formatting operation, but StarBurn_CdvdBurnerGrabber_BluRayFormat function always failed when I format BD-RE disc by 0 as formatProfileNumber.

If I always erase disc using StarBurn_CdvdBurnerGrabber_Blank by ERASE_TYPE_BLANK_DISC_FULL, the burning will be successful. But it's sometimes failed by ERASE_TYPE_BLANK_DISC_FAST. The disc formatted by ImgBurn tool was burned failed too by ERASE_TYPE_BLANK_DISC_FAST.

I attached the log file.

please help !


Attachments:
File comment: file
debug_log_burn_info (2).7z [55.32 KiB]
Downloaded 1325 times
Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Mon Nov 03, 2014 5:29 pm 
Offline

Joined: Fri Jan 26, 2007 4:31 pm
Posts: 450
Alexander (staff) will analyze logs and answer you tomorrow.


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Tue Nov 04, 2014 10:12 am 
Offline

Joined: Thu Dec 22, 2011 8:29 am
Posts: 51
In first about erasing. Your log doesn't contain information about unsuccessful erasing :( All erasing operations was completed with status "success".
Also about BD formatting - not all profiles are applicable for disc, we always performs disc formatting during full erasing, but we enumerate all profiles and select a really applicable before call formatting routine. Using inapplicable profiles may cause formatting failure or decreasing read/write speeds.


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Tue Nov 04, 2014 11:22 am 
Offline

Joined: Tue Jun 24, 2014 10:37 am
Posts: 26
thank you for your answer, how can I know which profile is really applicable for the BD-RE disc ? The formatting operation always be failed when I use the first profile, but the second one will be successful. so if one profile is successful, it is applicable ?
Sometimes, I don't know my disc whether formatted successful or not. Can one disc be formatted sevel times ? If formatted failed, can I format it again ?

I use FAST mode to erase my BD-RE disc, it's finish very soon, but the disc inforamtion is still there, such as volume label, used size info. Is it normal ?


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Wed Nov 05, 2014 8:59 am 
Offline

Joined: Thu Dec 22, 2011 8:29 am
Posts: 51
Quote:
Can one disc be formatted sevel times ?
- yes
Quote:
If formatted failed, can I format it again ?
- yes
Note: you don't need to call StarBurn_CdvdBurnerGrabber_BluRayFormat before first writing on disc, we check disk before writing and format it with applicable format if need.

Quote:
I use FAST mode to erase my BD-RE disc, it's finish very soon, but the disc inforamtion is still there, such as volume label, used size info. Is it normal ?
- I'll perform tests and review code today and answer tomorrow.


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Wed Nov 26, 2014 11:17 am 
Offline

Joined: Wed Nov 26, 2014 11:15 am
Posts: 1
Hello. Its me again. . After I burn BD-RE disc using your software and play it in my player, when I fastforward the video I just burned it will freeze. I have 3 blu ray plyers and its the same thing in each player. I also have another software and when I burn the same file in that program its fine. Is this common with your software? I checked the videos (videos before I burned them)and they play fine. My blu ray players are my computer, PS3 and a sony. I never had this problem with my other software. Is this unique to your software and do you have a fix for it? Thank you for your time.


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Tue Dec 02, 2014 8:41 am 
Offline

Joined: Thu Dec 22, 2011 8:29 am
Posts: 51
Please try next sequence.

1. Perform full erasing
2. Write video files and test on your BD Players
( Note: don't call StarBurn_CdvdBurnerGrabber_BluRayFormat between steps 2 and 1)

when bug still here please do same with new ( never used ) BD-RE

Tell me about results.
Regards, Alex


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Wed Dec 03, 2014 1:43 am 
Offline

Joined: Tue Jun 24, 2014 10:37 am
Posts: 26
alexander, it's fine burned by your advice. If I use full erasing mode, all is fine, but if I don't use it for new BD-RE, some disc is fine and some is not fine, especially for bigger than 25G bluray iso.
The full erasing must be needed for new BD-RE disc when first using ?


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Wed Dec 03, 2014 1:50 am 
Offline

Joined: Tue Jun 24, 2014 10:37 am
Posts: 26
thanks to alieen, by your test, there may be a bug in our software, I will try to fix it.


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Fri Dec 05, 2014 8:20 am 
Offline

Joined: Tue Jun 24, 2014 10:37 am
Posts: 26
Quote:
Hello. Its me again. . After I burn BD-RE disc using your software and play it in my player, when I fastforward the video I just burned it will freeze. I have 3 blu ray plyers and its the same thing in each player. I also have another software and when I burn the same file in that program its fine. Is this common with your software? I checked the videos (videos before I burned them)and they play fine. My blu ray players are my computer, PS3 and a sony. I never had this problem with my other software. Is this unique to your software and do you have a fix for it? Thank you for your time.


hello, alieen, can you give me a complete burn demo with checking drive, checking disc, erasing and burning ? I don't know what issue is in our software, my burn codes come from the V15.3 starburn SDK demo, C language libcmt version, such as TrackAtOnceFromFile project, Blank project.


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Mon Dec 08, 2014 10:10 am 
Offline

Joined: Thu Dec 22, 2011 8:29 am
Posts: 51
Please see our C++ (GUI) DataBurner sample


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Tue Dec 09, 2014 4:24 am 
Offline

Joined: Tue Jun 24, 2014 10:37 am
Posts: 26
ok, thank you, I will compare the demo and my codes, and follow the demo to retry. :)


Top
 Profile  
 
 Post subject: Re: ERASE_TYPE_BLANK_DISC_FAST
PostPosted: Sun Feb 08, 2015 5:53 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Do you have any updates with a newer build of StarWind SDK?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group