#1 Burning Software

It is currently Fri Mar 29, 2024 8:36 am

All times are UTC




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Erase progress in StarBurnX
PostPosted: Mon Feb 23, 2009 9:28 pm 
Offline

Joined: Mon Feb 23, 2009 9:11 pm
Posts: 3
I have the StarBurn SDK release 10.5. My application is written in C# and I am using StarBurnX DiscEraserClass to erase CD-RW. Sometimes, the OnProgress event seems to work OK. Other times, the OnProgress event says the progress percentage is 0% every time. Obviously, this makes it look like my application is hung (for 23 minutes). I do development on two different computers, and it just occurred to me that it may be working on one computer and not the other. Could that be the case? Is there a workaround?

At the moment, it is not working and the device is "TSSTcorp CDRWDVD TS-H493B D200".


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 24, 2009 1:14 pm 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

1) What does the "TSSTcorp CDRWDVD TS-H493B D200" device during 23 min? Is the media disc really erased?

2) We need to look into the StarBurn.log file. This file is usually created in the root of drive C:. Send this log file to me -dmitry.bortsov@rocketdivision.com.
P.s. delete this file and run your application again if your current log file is too big to be sent.

Regards,

Dmitry[/u]


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Mon May 18, 2009 3:11 pm 
Offline

Joined: Mon Aug 25, 2008 1:50 pm
Posts: 394
Hello Dima Sir,

I too have faced the same problem several times with different combinations of discs and drives. In some other posts also we had discussed the same problem. But I couldn't yet figured out the exact difference in erasing DVD +RW and DVD -RW. Many times I have seen this behavior for DVD -RW. But still I am not clear whether it always comes with that combination.

I can re-produce the same error should I send the logs?
Thank you.


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Sat May 23, 2009 4:27 am 
Offline

Joined: Mon Aug 25, 2008 1:50 pm
Posts: 394
Thank you for reply.

Newer dlls woks fine.
But while checking for erasing process. I am having an USB drive with which I was checking erasing. After almost 50% accidently drive was removed. But still erasing process was going on.
Actually StarBurnX should directly give me error about drive removal. I was observing StarBurn Core samples it is properly done there. Even erase process is aborted automatically with erase aborted error. Why the erasing process was not aborted? :?:

Will you please kindly look into the problem? Will you please check this special case in all other burning and grabbing sections also. :idea:
Thank you in advance.


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Sat May 23, 2009 7:52 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Please provide the log.


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Mon May 25, 2009 10:09 am 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

We are checking this problem!

Thanx!

Dmitry


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Mon Jun 01, 2009 6:34 am 
Offline

Joined: Mon Aug 25, 2008 1:50 pm
Posts: 394
Any Progress?
Is problem simulated with USB drive at your side?
Thank you in advance.


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Tue Jun 02, 2009 5:28 am 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

Yes, it's our bug ... we are fixing it!

Many Thanx!

Dmitry


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Thu Jan 28, 2010 5:40 am 
Offline

Joined: Mon Aug 25, 2008 1:50 pm
Posts: 394
Hello Dima Sir,

1) First of all thank you very much for StarBurn SDK V12.
2) It seems that above discussed problem of removal of USB drive while erasing disc is not fixed. :o

Thank you.


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Thu Jan 28, 2010 10:44 am 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello

We apologize ... will try to fix this problem in the next update of StarBurnX.

Regards,

Dmitry


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Sat May 08, 2010 8:18 am 
Offline

Joined: Mon Aug 25, 2008 1:50 pm
Posts: 394
Hello Dima Sir,
Any update on the discussed issue?


Top
 Profile  
 
 Post subject: Re: Erase progress in StarBurnX
PostPosted: Sat May 08, 2010 5:51 pm 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello,

Sorry, this bug is postponed.

Regards,

Dmitry


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group